Water Fountain WFT6
The WFT6 Drinking Water Fountain has durable push button operated Bubbler and Glass Filler Faucets. It is connected to the mains water supply.
Installing a Carbon Block Filter removes the Chlorine taste and smell of mains water. The Water Fountain needs to be connected to a waste trap, via a flexible waste pipe. The WFT6 is not intended for outdoor use. Water Fountains should only be installed by a competent & trained technician. The connection to the water mains must comply with Water Regulations and the connection to the
electricity supply must meet electrical requirements
- Allow 50mm clearance all round for proper
Ventilation - Mains water pressure: Min 1 bar, max 2.5 bar
(Always install a Pressure reducing valve
and Water Block) - Turn water supply on and open Bubbler and
Glass Filler to purge all air - Water Flow Control: Bubbler and Glass Filler are
adjustable - Cabinet: Polished Stainless Steel
- Bracket: Wall Bracket available separately
- Refrigeration System: Non toxic, non flammable R134a refrigerant
- Cooling System & Cooling Capacity: Direct Chill 26 litre per hour to 10C from incoming water temperature of 20C and a room temperature of 30C
- Compressor & Condenser: 1/6 hp, power 190w. Fan assisted condenser. Side Vented
- Power Supply: 220/240 Volt, 50 hz
- Dimensions & Weight: Cabinet 1015mm H, 305mmW & D Weight 25.6kg Glass filler height 290mm